ElphaPex DG2 Setup Guide: Complete Litecoin & Dogecoin ASIC Mining Tutorial

Introduction: What is the ElphaPex DG2?

The ElphaPex DG2 is a high-performance Scrypt ASIC miner designed specifically for Litecoin (LTC) and Dogecoin (DOGE) merged mining. With stable power consumption of around 4,000 – 4,100W and efficient cooling requirements, the DG2 delivers consistent hashrates while maximizing profitability.

For miners looking to enter or scale in the Scrypt mining market, the DG2 provides the perfect balance of power, efficiency, and reliability. This guide will walk you step-by-step through the full process — from unboxing and hardware setup to configuring the Web GUI and connecting to your mining pool.

Unboxing: Secure Packaging and Delivery

When you receive your ElphaPex DG2, it will arrive in a large reinforced shipping box, tightly packed with protective foam padding. This ensures the device remains safe during transit, regardless of shipping distance.

The solid packaging reflects the manufacturer’s attention to detail and gives miners confidence that their equipment will arrive intact and ready to run.

Preparation Before Setup

Before powering on the DG2, ensure the following requirements are met:

Network Connection
- The DG2 does not support Wi-Fi and requires a wired Ethernet connection.
- Place the miner near your router or switch for reliable connectivity.
Power Requirements
- The DG2 requires a P13 to C20 power cable.
- The C20 end plugs into the miner, and the P13 end connects to a 240V 30A PDU.
- A stable 240V 30A circuit is mandatory and should be installed by a licensed electrician.
Cooling and Ventilation
- This is a high-wattage device and produces significant heat output.
- Install the DG2 in a well-ventilated environment, ideally with an exhaust fan or AC cooling.
- Proper airflow prevents overheating, throttling, and downtime.

Step 1: Hardware Connections

Plug an Ethernet cable into the DG2’s network port.
Connect the C20 power cable to the miner.
Insert the P13 side of the cable into the PDU.
Power on the miner — it will boot automatically and request an IP address from your router.

Step 2: Accessing the Web GUI

To configure the DG2, you’ll need its IP address:

Option 1: Log into your router’s admin page and check the connected devices list.
Option 2: Use a free network scanner such as Advanced IP Scanner to detect active devices.

Once you have the IP, enter it in your web browser. You’ll be prompted to log in:

Username: root
Password: root

After logging in, you’ll access the DG2 Web GUI dashboard.

Step 3: Start Mining

After saving your settings:

The Web GUI dashboard will show your miner’s hashrate (may take 1–2 minutes to appear).
On your mining pool dashboard (e.g., ViaBTC), the DG2 will be listed as an active worker.
Power usage may initially spike to 4,200W+, but within 10–12 minutes it should stabilize around 4,000 – 4,100W.

At this point, your DG2 is officially mining Litecoin and simultaneously earning Dogecoin (and other Scrypt coins) through merged mining.

Troubleshooting & Optimization Tips

No network connection: Verify your Ethernet cable and router DHCP settings.
Excessive power draw: Ensure the DG2 is connected to a proper 240V 30A circuit.
Overheating issues: Improve airflow with external fans or cooling solutions.
Pool downtime: Always configure at least 2–3 backup pools to avoid lost earnings.

Why Choose the ElphaPex DG2?

High performance: Delivers powerful Scrypt hashrates with stable consumption.
Merged mining support: Earn Litecoin and Dogecoin simultaneously for maximum ROI.
Industrial-grade design: Built for 24/7 operation in demanding mining environments.
Easy configuration: Simple Web GUI setup makes it accessible to both beginners and pros.

Conclusion

The ElphaPex DG2 ASIC miner stands out as one of the most efficient and profitable Litecoin and Dogecoin miners in 2025. Its powerful performance, reliable energy consumption, and support for merged mining make it an excellent choice for miners seeking long-term stability and returns.

By following this step-by-step setup guide, you can unbox, install, and start mining with your DG2 in under an hour.

If you’re serious about Litecoin and Dogecoin mining, the ElphaPex DG2 is a strong investment.

References

Here are some useful resources to help you further understand ASIC setup, Litecoin/Dogecoin mining, and pool configuration:

Litecoin Official Website – https://litecoin.org
Dogecoin Official Website – https://dogecoin.com
Mining Hardware Comparison (ASIC Miner Value) – https://www.asicminervalue.com
Advanced IP Scanner (Network Tool for Finding ASIC IPs) – https://www.advanced-ip-scanner.com